Install telnet mandriva

NOTE: Our sessions are back-to-back without any rack rest in between. To access the switch from a remote host with Telnet, perform the steps in Table Step 1 From the remote host, enter the telnet command and the name or IP address of the switch you want to access. Step 2 At the prompt, enter the password for the CLI. Disconnecting Telnet.

Use this troubleshooting procedure once you have performed a telnet session, observed the results, and now need to disconnect the telnet session. Press Ctrl-] hold down the Ctrl key and press the ] key. Home » Linux. Like this post? Please share to your friends:. Below is the detailed guide. Step 1. Open Control Panel in Windows Step 2.

Click Turn Windows features on or off from the left panel. Step 3. Find Telnet Client in the list and make sure it is checked. Now you can use telnet command to test the port connectivity with the remote server. In below example we are using telnet command to check the google. As you can see the status is showing connected it means local client is able to reach to remote google. Use telnet command in Linux.